Distiller CE
Combinator Edition
JTEX Electronics and Combinator are pleased to announce an all new, modular & affordable onboard tone shaping solution for bassists and guitarists alike – the Distiller CE (Combinator Edition) variable low-pass filter.
Distiller CE is custom-tuned by Combinator and offered as a variant of JTEX’s stock Distiller circuit – originally based on Alembic’s famous and unique 12dB-per-octave filter.
The CE edition differs in its range of adjustability, operating more as a top-end “tuner” of pickups’ resonant peaks than a full-range filter. Combinator (aka bassist/vocalist/producer Sean Fairchild) uses the Distiller CE in place of a typical preamp’s active treble or passive tone control, variably sculpting his high-end response between 1 and 10 kHz, while adding up to +12dB of peaking boost at the cutoff frequency – allowing for emulation of many different classic and modern pickup voicings.
Similar to the way a passive tone control can create a small peaking boost at its lowest range of adjustment, an active LPF with adjustable peak gain can replicate that behavior anywhere along its range, approximating different pickup personalities and tones. Both the Distiller and Distiller CE feature a 3-way selectable boost control, with settings for flat/no boost, +5dB, and +12dB.
Specifications (Distiller CE)
Input impedance: 1 MΩ
Output impedance: 2.7kΩ
Supply voltage: 9V or 18V
Idle current draw: 0.4mA
Battery life (alkaline): 1100 hours
Noise floor: -105dBu
Max unclipped output: +12dBu
Dynamic range: 117dB
Cutoff frequency range: 1kHz - 10kHz
Filter slope: 12dB/octave
Resonant peak (Q switch): 0 / +5 / +12dB
Gain adjustment range: +3 to +16dB
Board size: 33x23mm
Potentiometer: Ø6mm solid round shaft. Bushing: M9x0.75, 10mm long